The internet, without a doubt, revolutionized the world. It’s also safe to say that Wi-Fi contributed to the internet’s success. It’s one thing to bring people from all over the world together. It’s another thing entirely to make that link as simple as possible.
Despite its ease, Wi-Fi isn’t always a superb option to distribute internet access throughout a home. For starters, continual Wi-Fi exposure has serious health consequences from the EMFs. Second, you’ll lose a lot of signals if you put enough barriers and obstructions between you and your Wi-Fi router. As a result, you’re essentially exposing yourself to non-ionizing radiation for no apparent advantage.
Therefore, even if your home has multiple rooms, you may wish to consider wired connections throughout the house for these and other reasons. But now you’re reasonably wondering how to get wired internet in another room. It may appear to be a big task, but some techniques may make it simple and well worth your time and effort. We’re here to assist you with that, so let’s get started!
Why Should You Get a Wired Internet in Another Room
Network Configuration and Connecting to It
We’re sure that everyone has had trouble connecting to a wireless network. It’s also impossible to troubleshoot when you have a problem. That’s just connecting to a wireless network; attempting to set one up can be a nightmare. In addition, the standards for network encryption are constantly evolving.
Wireless networks are vulnerable to several connection problems, especially when reaching the network’s wireless range’s edge. It’s also not unusual for the router to crash and require resetting. We’ve had to do this so many times in our house that we’ve lost count. Unless the entire building’s power goes out, wired networks rarely go down.
When items like walls get in the way of a wireless network’s signal, it might cause problems. The wireless access in our prior apartment complex was in a different building. That meant the only way we could get online was to stand in the kitchen’s far corner, near the window. Even then, if we moved in the wrong direction, we would lose connection.
In general, wired networks are substantially quicker than wireless networks. With the introduction of Gigabit routers and other new technologies, data speeds have steadily risen. Furthermore, wired networks are less likely to have dead areas, which can occur with wireless connections.
Each device is linked to the network by a separate connection, with each cable transmitting data at the same rate. A wired network is also quicker since it is never slowed by unneeded or unexpected traffic. Unauthorized users cannot connect to the network unless they utilize an Ethernet connection to connect their devices.
A wired network is protected against unauthorized access when configured with the proper firewalls and other security programs. A wired network with security technologies will offer your workplace the protection requirements you need to execute regular business operations as long as the appropriate ports are enabled, and the network is checked for suspicious activity.
The structure for a wired network can be pretty inexpensive to install, depending on the setup. Routers, ethernet cables, switches, and other networking hardware are reasonably priced. Furthermore, the hardware’s lifespan usually lasts a long period before an upgrade is required.
How to Get Wired Internet in Another Room
Having a wired internet connection throughout your home is beneficial. It has several advantages and functions for you, as previously discussed. It provides you with a quicker, more dependable, and improved internet service.
It also has certain unusual advantages over wireless connections; however, the wires themselves are a significant downside of having a wired internet connection. Having to run wiring throughout the rooms is a huge undertaking. So, in this post, we’ll go over some networking recommendations and how to get wired internet in another room.
Routers are the critical piece of home networking that connects everything. These devices can connect to your modem, broadcast wirelessly, and typically have wired network connectors on the back.
There is a reasonable probability that you already have one if you use wireless internet at home. You can find a variety of connections for connecting devices via Ethernet cables on the back of your router. Your present router will almost certainly be enough if you need to connect a few devices via wire. Must read: Should I Leave My Wi-Fi Router on All the Time?
When you examine all of the devices you wish to connect via wire, you could find that your router isn’t quite up to the task. This is when a switch, a piece of networking gear, comes into play. Switches are simple devices that route traffic from several ports to a single output port.
Consider switches as a means to expand the number of ports on your router. If your router has four ports, you can connect a switch to one of them to increase the number of ports to eight or twelve. On the other hand, Switches can only do one thing; they can’t accomplish the other things your router can, so you’ll still need both.
Hubs are frequently confused with switches, although they are not the same thing. These devices operate in a completely different way than switches when it comes to network traffic. Switches employ a virtual circuit paradigm, whereas hubs use a broadcast approach.
Hubs transmit network traffic to all connected devices, whereas switches only transmit data to the destination device. They may be less expensive, but they might put a load on your network and cause other issues. If you’re not sure what you’re doing, an inexpensive switch is a better option than a hub.
Methods on Getting Wired Internet in Another Room
We’ll go over some of the different options for getting a wired connection to numerous rooms in your house. Let’s consider a look at each one individually:
Using Ethernet Cables
Running ethernet cables from your router to your devices is the simplest way to get a wired internet connection to other rooms in your house. However, having strewn cords across your home isn’t ideal, so what are your options?
They’re not fantastic, but you might be able to hide them under your carpet, behind furniture, or along the baseboards with tape. On the other hand, there are a variety of gadgets available on the market that can assist you in concealing or removing your cables from sight. If none of those solutions are suitable, consider the powerline adapter approach described below.
Using Powerline Adapters
Using powerline adapters is another technique to get wired internet connectivity in numerous rooms. These gadgets connect to your home’s electrical outlets and send data over the existing electrical lines.
They won’t be a perfect substitute for a genuine ethernet connection, but they will be faster and more dependable than a wireless connection. It’s also not difficult to set them up. Plug the powerline adapter into an outlet near the router and connect it via a coaxial cable.
Now, put the powerline adapter into a nearby outlet and link it to the device with a coaxial cable in the room where you wish the connection to be made. You will require additional adapters to connect more devices, and they will be added to the network in the same manner as before.
They’ll all send data to the adapter that’s linked to your router. All you have to do now is make sure they’re plugged in. These adapters are generally sold in a set that includes two adapters and two Ethernet cables connecting them to your router.
Ensure you’re utilizing a direct outlet rather than a power strip since these powerline adapters consume a lot of power, which could put your electricity strip at risk. Typically, the adapters come in a bundle with two more ethernet cables for your network connections.
Also, make sure that your purchase is refundable if the item fails to function for some reason or you are dissatisfied with the goods. Furthermore, the power adapters contain built-in power outlets, allowing you to use the power socket for another item after it has been plugged in.
Using DSL Cable
DSL cable offers the ability to power your online gaming or any other professional endeavor. It’s the same cable you can use to connect your phone line to your modem for internet access. If you don’t want to give up even a smidgeon of speed, installing a DSL cable in every room is the simplest option. Read more: How to Turn Off the WiFi in Your Home
This allows for the use of multiple devices without sacrificing performance, as it is pretty fast. You’ll need to install a different modem in each room if you want to use a DSL cable for wired internet in another room.
It necessitates extensive cabling. Furthermore, these wires must be designed explicitly for data communication. As a result, better signals and quicker internet speeds are expected. MoCA is an abbreviation for Multimedia over Coax.
If you already have cable lines, you can use them to connect to the internet. These lines can reach speeds of up to 1 Gbps, making them faster than Powerline adapters and Ethernet cables. Purchase a set of MoCA adapters and put them into the coaxial ports to install MoCA. Connect your modem to one end of the network and your devices to the other.
Benefits of Ethernet Ports in House
Increased Efficiency with Multiple Ethernet Ports
You can link ethernet ports together to share an IP address and function as a single port. This improves bandwidth, and each additional port allows a computer or server to transmit more data across the system, resulting in higher throughput. When two networks are connected to a single server, one network can continue to operate while the other is down for maintenance.
Different networks can also connect to the same computer or server and share data. A direct network connection improves the efficiency and reliability of high-resolution cameras, real-time sensors, and other data-intensive equipment.
When a landline or cell tower is unavailable, you can use an additional Ethernet port to attach a satellite modem for network connectivity. When a landline is not available but is frequently utilized, you might use a cell modem instead. Read: What is a Safe Distance From a Cell Tower?
Increased Security with Multiple Ethernet Ports
If one of the ethernet ports fails, the other continues to work usually. A user could use an additional Ethernet port to run a backup network with its IP address. The backup network is unlikely to be affected if the primary network fails or is hacked, and you can use it while the primary network is being restored.
One can use multiple Ethernet ports to distinguish between different networks, such as private and public networks or storage and service networks. The PC or server works like a firewall to safeguard each network and keep traffic separate.
You can link various devices to additional Ethernet ports. Device data, like network isolation, can be kept isolated from the more comprehensive network.
What is EMF?
Electric and magnetic fields are intangible zones of energy, also known as radiation, created by electricity, the flow of electrons or current along a wire. Voltage, the strength used to push electrons through the wire, similar to water being pushed through a pipe, creates an electric field.
The electric field becomes stronger as the voltage rises. Magnetic fields are produced only while current flows usually need a device to be turned on, whereas electric fields are generated whether or not a device is turned on.
Possible Side Effects of EMF
Electric, magnetic, and electromagnetic fields can have short-term health impacts if they are strong enough. Exposure to powerful enough low-frequency fields can cause dizziness, light flashes, and tingling or pain due to nerve activation.
Strong radiofrequency fields can cause body tissue to heat up, causing tissue and organ damage. Exposure limits have been established for both low frequency and radiofrequency fields below which these acute effects do not occur.
While Wi-Fi is convenient, it is not the safest way to connect to the internet throughout your home. You can have even better and safer internet in every room with a bit of work and imagination. We believe that our guide on how to get wired internet in another room has helped you understand why Wi-Fi and the EMF rays it emits are so dangerous to us all.
Wired internet, in our opinion, offers far more advantages than its wireless counterpart. So now is the ideal moment to install a wired internet connection in your home.